Apollo Intelligent Meter Series IMY Manual de usuario descargar pdf (Pagina 42)

20. CERTIFICATIONS AND COMPLIANCES:

SAFETY

IEC 1010-1, EN 61010-1: Safety requirements for electrical equipment for

measurement, control and laboratory use, Part 1.

IP65 Enclosure rating (Face only), IEC 529

Type 4 Enclosure rating (Face only), UL50

ELECTROMAGNETIC COMPATIBILITY

Immunity to EN 50082-2

Electrostatic discharge EN 61000-4-2 Level 2; 4 Kv contact

Level 3; 8 Kv air

Electromagnetic RF fields EN 61000-4-3 Level 3; 10 V/m

80 MHz - 1 GHz

Fast transients (burst) EN 61000-4-4 Level 4; 2 Kv I/O

Level 3; 2 Kv power

RF conducted interference EN 61000-4-6 Level 3; 10 V/rms

150 KHz - 80 MHz

Emissions to EN 50081-2

RF interference EN 55011 Enclosure class A

Power mains class A

Notes:

1. Metal bezel of unit connected with ground lead from rear bezel screw to metal

mounting panel.

2. Self-recoverable loss of performance during EMI disturbance at 10 V/m:

Process input and/or analog output signal may vary during EMI disturbance.

For operation without loss of performance:

Unit is mounted in a metal enclosure (Buckeye SM7013-0 or equivalent)

I/O and power cables are routed in metal conduit connected to earth ground.

Refer to the EMC Installation Guidelines for additional information.

21. CONSTRUCTION: Die-cast metal front bezel that meets NEMA 4/IP65

requirements for wash-down and/or dusty environments when properly

installed. Pollution Degree 2. Case body is black, high impact plastic

(panel gasket and mounting clips included).

22. CONNECTION: Removable terminal blocks

23. WEIGHT: 1.2 lbs. (0.54 kg)

-40-

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Sin comentarios

Apollo Intelligent Meter Series IMY Manual de usuario Pagina 42