Apollo SL Manual de instalación descargar pdf (Pagina 34)

Installation

26 Apollo SL50 / SL60 Installation Manual

functions. Start with the unit turned on and operating in the normal mode. Refer to the user’s

manual for operating instructions.

1. Verify a valid position is displayed.

2. Check the database to ensure it is for the right coverage area and is not expired. To

check the database:

a) Press SYS, rotate the LARGE knob to the “SYSTEM INFO” page, and press ENT.

b) Rotate the SMALL knob to display the database information. The database name,

expiration date, and version will be displayed.

3. Enter a direct to waypoint. Press the DIRECT-TO button, use the LARGE and SMALL knobs

to select a nearby waypoint, then press ENT. Or use the nearest search function to select

a waypoint.

4. Verify the bearing and distance to the selected waypoint.

If the database is expired, or if a different coverage area is needed, contact the II Morrow

factory for an update.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 61 62

Sin comentarios

Apollo SL Manual de instalación Pagina 34